This series of low powered and cost effective PV ChargeController is designed for trouble free application in remote high humid environment. The whole unit is potted in Epoxy Resin. It is suitable for seal or wet type lead acid battery and all types of PV modules.

The full solid state electronic components using 0 to 100% Pulse Width Modulation charging and power switching byMOSFET assures optimal utilization of sunlight and safe charging of battery.

Selection for charging sealed or wet type of battery ismade possible by shorting of terminal wire. The SBC-2106L is made with Night Light Load DC output.

Features:

  • Compact size
  • Water resistant
  • Simple to use
  • Electronic Blocking of reverse current to PV module
  • Sealed and Wet type battery connection
  • Night Light Mode DC output for L version

Specifications:

Battery System Voltage
12 VDC
Max. PV Open Circuit Voltage
26 VDC
Max. PV Short Circuit Current
6A
PWM Setpoint
Sealed Type Battery Setting: 14.3V ± 0.1V
 
Wet Type Battery Setting: 14.8V ± 0.1V
Min. Operating Voltage
3VDC
Rated Charging Current
6A
Max. Charging Current (5 mins.)
8A
Rated Load Current
6A
Max. Load Current (1 min.) 
8A
PV Voltage While Load Turn ON
SBC-2106 does not have load terminals
<= 3.5V
PV Voltage While Load Turn OFF
SBC-2106 does not have load terminals
>=5 ±0.2V
Low Battery Shutdown for Load
SBC-2106 does not have load terminals
<= 10.5V ±0.2V
Low Battery Recover for Load
SBC-2106 does not have load terminals
>= 11.8V ±0.2V
Approvals
EN-55022 / EN-61001 / FCC Part 15 SUBPART B CLASS B
Ambient Temperature Range
-40 ~ +60°C
Relative Humidity
100%
Dimension ( L xW x H )
97 x 46 x 20.5 mm
Weight
103g

(SBC2106L)

SKU SBC2106L
Model # SBC2106L
Unit Of Measure each

Be The First To Review This Product!

Help other Bourne Superstore users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category