12V DC, 3 Amp Switchmode Plugpack Supplied with a fixed positive to tip 2.1mm DC jack (2.1ID x 5.5OD x 10L). Compact design with high current regulated output. Energy authority approved. MEPS approved. Dimensions: 100L x 50w x 35D mm.

Features

Dimensions: 36.5 x 31.5mm
Input Range: 100V to 240V AC
Output Voltage: 12V DC
Barrel length: 10mm
Plug tip type: 5.5mm outer diameter and 2.1mm inside diameter
Polarity: Positive centre
Cable length: 1800±50mm
MEPS efficiency level: VI
Australian standards compliant
Suitable for a range of electronic devices
Compatible with Australian mains power point

Specifications

Rated input voltage: 100-240Vac
Operating range: 90-264Vac
Rated input frequency: 50/60Hz
Variation Frequency: 50/60Hz +/- 3Hz
Rated input current: 0.8A Max.
Primary current protection: An adequate internal fuse on the AC input line is provide
Power consumption (no loading): 0.1W Max. (Input voltage 115V and 230V)
Configuration: II Conductor
AC Leakage Current: 0.25mA Max.At240Vac input
DC output voltage: 12V
Minimum load current: 0.01A
Rating load current: 3A
Rating output power: 36W
Line regulation: The line regulation is less than ±5% while measuring at rated load and +/-10% of input voltage changing.
Load regulation: The load regulation for +12V is less than ±5%, at measured output load from 0% to 100% rated load
Temperature: Operating: 0°C +40°C, Non-Operating: -20°C +80°C
Humidity: Operating: 10%~90% (Non Condensing), Non-Operating: 10%~90% (Non Condensing)