COAX CLARIFIER TEST IDENTIFY

Dark unpowered coax systems give no clue as to their design, condition or configuration. The new Coax Clarifier™ by T3 Innovation makes it simple and easy to discern the layout of a coax network, locate faults on individual cable runs, identify remotes through splitters, and determine cable run lengths. In addition, separate wiremapping sets allows a technician to map out the entire coax system and measure the quality and characterization of the overall network for carrying services, such as high grade video, surveillance data and HD programming.

Test, Map, Display, And Qualify Coax Run Quality

Identifies cable faults
Displays cable run quality
Detects Coax RF Remotes through splitters
Locates splitters in the system
Tests and grades splitter performance
Measures cable length up to 1,500 feet
Wiremaps up to 12 coax locations

Benefits

Fast testing using multiple wiremapping remotes
Quickly discover coax system layout configuration to save time
All testing in one unit: Discovery, Quality and Condition
Clear concise measurement display for easy understanding of capability of each run

Coax Run Mapping

Maps runs through splitters to show an accurate picture of the coax system layout using up to 4 Coax RF Remotes. Up to 12 ID Only Coax Remotes are also available for wiremapping on home runs.

Cable Length

Determines cable run length and reports the location of an open or unterminated cable.

Quality Of Network

Measures overall network quality and clearly depicts network reading as both a bar graph and a digital return loss number, measured in dB.

Tone Tracing

Traces coax runs with four unique tones to quickly distinguish between respective outlets.

Package Contents

Coax Clarifier
4x Coax RF Remotes
Tone Probe (TP200)
Nos. 1 - 12 ID Only Coax Remote Set in Foam Holder (RK112)
Cable Assembly, Screw-On F-Jack to Push-On F-Plug Cable - 12 inch (CA004)
Adapter, F-Jack to BNC Jack (AD002)
5x Adapter, F-Jack to Push-On Cable (AD003)
5x F-Connector Coupler, F81 (AD004)
4x F-Terminator Plug (AD005)
T3 Zipped Compartmentalized Pouch (CP200)

(CC250)

Specifications

Physical Dimensions	Size: 17.3 x 8.0 x 3.3 cm Weight: 340 grams with battery
Power	4x 'AA' alkaline batteries Stand-by: 4 years Active: 20 hours average
Operating Environment	Operating temperature: 0 to 50°C Storage temperature: -20 to 60°C Humidity: 10% to 90%, non-condensing Altitude: 3,050 meters maximum
Quality (Return Loss)	0.0 to 60.0 dB
ID Only Coax Remotes	100 ohms maximum DC resistance, center conductor plus shield
Coax RF Remotes	17dB maximum attenuation to remote location (splitters, cable, etc.)
Audio Frequency Tone	1,000 and 600 Hz – 4 patterns (High only, Low only, 2 warble tones) 3.3Vp-p (pin or shield), 6.6Vp-p (both pin and shield) open circuit
Radio Frequency Tone	10, 20, 30 or 40MHz, 1Vrms into 75 ohms
Battery Low Level	Approximately 4 volts
Capacitance Length	Range – 0 to 1,500 ft (457 meters) min at15pF/ft length constant Accuracy – ±5% ±1ft (0.5 m)with correct length constant Length Constant Range – 10.0 to 40.0 pF/ft (33 to 131pF/meter)
Compliance	Complies with CE directives.