Two-Channel Wireless Switching System

The HNS310RK Radio Switch Kit is designed with heavy duty 20A outputs for remote switching of lights, pumps, motors and fans. Applications could include factories, farms, warehouses, pools, sheds and heritage buildings, or any area where it would be costly, time-consuming or impossible to run wiring to the switch location.
This ready-to-install wireless switching system consists of a transmitter and a receiver that communicate via radio frequency (RF) signals. The two-channel battery powered Transmitter controls two load outputs on the Receiver, allowing for dual channel switching. The Transmitter inputs are connected to any type of on/off switch, typically a standard single gang or dual gang wall switch. The transmitter is powered by a user-replaceable CR2032 lithium battery that provides up to 5-years battery life.
The HNS310RK has a remote switching range of up to 50 metres line of sight and 30 metres in standard domestic, commercial or industrial environments.

Kit Contents

1 x HNS312TR Transmitter designed to fit inside wall box or cavity
1 x HNS311RX Receiver designed to fit through a downlight hole
Looking for multi-way switching? Connecting additional HNS312TR Transmitters allows for multiple switch locations (sold separately).

Operating Conditions

Supply Voltage
HNS311RX Receiver: 230-240Va.c. 50Hz
HNS312TR Transmitter: 3V Lithium Battery
Operating Temperature: 0 to +50 degrees Celsius
Compliance Standard: AS/NZS 3100, AS/NZS 4268 & AS/NZS 61000.6.3
Maximum Load: 2 x 20A (2 x 4800W)
Output Type: Switched 230-240Va.c. 50Hz
Battery Life: up to 5 years
Operating Frequency: 433MHz
Dimensions: 214mm L x 55mm W x 44mm H
Note: Operation at temperature, voltage or load outside of the specifications may cause permanent damage to the unit.
For load compatibility, installation instructions and important safety warnings, please refer to the User Manual (see Resources).