Thank you for choosing the Swann Wireless Door Chime. It’s an ideal unit for easily installing a doorbell without the hassle of wiring. Simply add some batteries, mount the two pieces where needed and you are ready to go! The doorbell features 16 chimes to suit your needs.

Installing Batteries (Chime unit) 

• The chime  unit requires 3 x AA batteries to operate (which are not included). For best performance, use fresh, high quality AA alkaline batteries.
• To install them, unclip the battery cover on the rear of the unit to reveal the battery compartment.  
• The  polarity of batteries is indicated by the markings inside the battery compartment.

Changing Batteries (Doorbell unit)  

• The doorbell requires 1 x 23A/12V battery (included). 
• The battery is already installed; simply remove the small plastic tab from the slot on the back of the doorbell to power it up.  
• If you need to replace the battery, insert a small flat-head screwdriver into the small notch at the base of the doorbell and lift the front cover off.
• Replace with a battery of the same type. Make sure the battery is oriented properly before refitting the doorbell front cover.

Changing the Chime Tune

• To change the chime tune, remove the front cover of the doorbell using a small flat-head screwdriver. 
• Inside the doorbell unit, locate the purple Chime Select button as shown opposite. Press the Chime Select button to play the next tune. Keep pressing the button until you hear a tune you like. You do not need to confirm your selection. The tune playing is the tune selected and the one which will be heard when the doorbell is pressed. 
• Refit the doorbell front cover.