{tab Features}

The T3 SNAP PLUG™ and SNAP PLUG Tool is designed to simplify the process of terminating RJ45 modular plugs. It is a time-consuming process to assemble traditional RJ45 modular plugs, and the most difficult part would be puttingthe wire into the conductor incorrect order. The thicker the conductor is, the more difficult the job is going to be.
The T3 SNAP PLUG™ enables the conductors to pass through the connector itself, making it a lot easier to verify wiring order before crimp, reducing possible errors and waste of materials.

  • Shielding shell with the external ground and RJ45 connector 2pc type
  • Pack of 50pcs
  • Max conductor size: 1.2mm / 0.047"
  • Solid or stranded cable: 23 AWG
  • Cat6a & Cat6 STP 2pc, 3 prongs 
  • 50u fully gold plated RJ45 pin contacts
  • Meets ANSI/TIA specifications
  • Compliant with POE and POH standards
  • UL RoHs FCC compliant

{tab FAQ}

Q: I have a Platinum Tools crimper EZRJPROHD that was designed for the Platinum Tools EZ connectors. Can I use this crimper on the T3 Snap Plug?
A: The T3 products are designed with tight tolerances to work perfectly together. Platinum Tools manufacture theirEZ plugs in the US as opposed to Taiwan, so their matching crimper is designed to work with just their connectors. Having said this, in our samples, the Platinum crimper stillworked with T3 connectors. Below is a picture of the end result. Note the slight indentation (damage) on the T3 connector left by the Platinum Tools crimper. Please be aware, as the crimp tool is not designed for otherplugs, if you use it very often, your crimp tool will be worn out quickly.

{/tabs}

(T3SPSC6G1.2)

SKU T3SPSC6G1.2
Model # SP-STP-Q12X-50AP
Barcode # 9328202032614
Brand T3 innovation
Assembled Width 0.187m

Be The First To Review This Product!

Help other Bourne Superstore users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category