Overview

Representing hundreds of hours of research and development by Redback, this universal touch-screen wallplate is the perfect control system for commercial and domestic automation. It’s stylish low pro?le design lends itself to installation in new modern homes, classrooms, lecture theatres or corporate boardrooms. The LCD panel can be con?gured from 1 to 12 buttons, which can be individually labelled. Con?guration is performed using the supplied software, which is then transferred to the plate via a Micro SD card. A library of button icons is included and can be customised by the user if required. Each button can be programmed for either serial (with hex code or ASCII commands), IR, or relay control, making it ideal for controlling just about any electronic device.

For IR applications the plate can learn and capture IR strings from almost any remote control. User generated macros can be created consisting of multiple commands in a single button press. This is ideal for performing multiple tasks at once ie: turn on projector, turn on ampli?er, turn off lights, drop down projector screen etc. Wall plate fits into a standard electrical wallbox for ease of installation.

 

Features

  • User programmable buttons with customisable icons
  • Inbuilt icon library for commonly used buttons
  • Multi-command macros
  • IR learningn facility
  • SD card configuration upload
  • Dual cover wallplate to suit existing decor
  • Single U/UTP Cat5 cable connection
  • Haptic and audible feedback of button presses
  • Easy to program
  • 10 Year Warranty (Cracked or broken screen excluded)
  • Australian Designed and Manufactured
 

System Hubs



A 6505A 3 Relay, 2 Serial Control Hub

Previously sold as part of the A 6500A, this unit is now a stand alone product.
Designed to be used in conjunction with the A 6500A programmable touchscreen wallplate, this control hub enables the control of a variety of devices. Connection to the A 6500A wallplate is via Cat5/6 cable up to 50m away. All commands from the programmed plate are then transported to this hub and the appropriate command signal being either serial (RS232/485 or both), IR or relay is then output to the corresponding pluggable terminals. Combined with the A 6500A this could be used for controlling an AV system in a classroom, lecture theatre, board room etc. The serial outputs could be used to control a projector and amplifier, the IR for controlling a set top box and relays for motorised projector screen, lighting etc. Requires 24V DC power which in turn powers the A 6500 wallplate. Size: 66W x 131W x 29H inc flanges.

Dual RS-232 or RS-485 serial outputs
Infra-red control output
PIR (or closing contact) trigger
3 output relays (voltage free N/C & N/O contacts) 2A max (Note: Only 2 relay outputs available with the PIR option)
U/UTP Cat5 cable connection to A 6500A wallplate
24V DC Input
10 Year Warranty
Australian Designed and Manufactured



A 6510 12 Relay Control Hub
Redback A6510 Front PanelThis relay hub consists of 12 relays with isolated sets of voltage free contacts that close on operation. The relay hub can be used in three ways:

1. Direct connection via Cat5/6 UTP cable to the A 6500 wallplate, which is programmed to control relay activation.

2. As an expansion to the A 6505 hub, increasing the total number of relay contacts from 3 to 15. In this configuration, one of the serial outputs of the A 6505 would be used to control the A 6510. These hubs should be located as close together as possible.

3. As a standalone serial controlled relay hub for use with any third party system utilising RS232/485.

Requires 24V DC input. Will provide power to A 6500 wallplate if connected.
Size: 66W x 131W x 29H inc flanges.


A 6515 2 Relay (High Current) Control Hub
This relay hub consists of 2 high current (16A) relays with isolated sets of voltage free contacts that close on operation. The relay hub can be used in three ways:

1. Direct connection via Cat5/6 UTP cable to the A 6500 wallplate, which is programmed to control relay activation.

2. As an expansion to the A 6505 hub, increasing the total number of relay contacts from 3 to 5. In this configuration, one of the serial outputs of the A 6505 would be used to control the A 6515. These hubs should be located as close together as possible.

3. As a standalone serial controlled relay hub for use with any third party system utilising RS232/485.

Requires 24V DC input. Will provide power to A 6500 wallplate if connected. Size: 50W x 131W x 46H inc flanges.


System Diagram

 Specifications

  • Input connection: Micro USB (USB Keyboard)
  • Output connection: RJ45 8P8C
  • Data transmission: cat5e cabling max 50m
  • Wallplate: Dual Cover
  • Dimensions: 2W x 116D x 13H
  • Power: Powered by A 6505A/10/15 over Cat5e cable
  • Current Draw: 50mA
  • Weight: 0.075kg

    *Specifications are subject to change without notice.

 Warranty

10 YEARS

We offer 10 years warranty on this product from its date of purchase.

(A6500A)

SKU A6500A
Brand REDBACK

Be The First To Review This Product!

Help other Bourne Superstore users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category