222 SERIES Compact Connectors with Cage Clamp®

The compact splicing connector for all conductor types: By using the 222 Series splicing connectors, you can connectsolid conductors with a cross section of 0.08 to 4 mm and fine-stranded and stranded conductors with cross sections from 0.08 to 2.5 mm . Without using any tools!

Wiring is very easy: Strip 9 - 10 mm/0.37 inches from thedesired conductor, open the clamping unit via the integratedlever, and insert the conductor. In addition to standard applications in building installations, these connectors canalso be fixed in position for use with mounting carriers, e.g. in distribution boxes.

In practical use, this connector can be used for intercomwiring, lighting fixtures, sunblinds, awnings, door and gatecontrols, inter phones, pumps, loudspeakers and many other applications without tools!

Stranded / solid wires
Wide range of wire sizes
Combination of different wire sizes and types in one connector
Small space consumption
Built-in test point
Protection against electrical shock, touch safe
Low installed cost and safe operation
Maintenance-free connection
A reusable connector

Name	Value
Color	gray
Pollution degree (1)	2
Rated voltage EN (1) [V]	400V
Rated surge voltage (1) [kV]	4kV
Nominal current [A]	32A
Connection technology (1)	CAGE CLAMP®
Connection type	CAGE CLAMP®
Conductor type (1)	solid stranded
Cross section from (1) [mm ]	0.08mm
Cross section up to (1) [mm ]	2.5mm
Cross section from (1) [AWG]	28AWG
Cross section up to (1) [AWG]	14AWG
Conductor type (2)	fine-stranded
Cross section from (2) [mm ]	0.08mm
Cross section up to (2) [mm ]	4mm
Cross section from (2) [AWG]	28AWG
Cross section up to (2) [AWG]	12AWG
Stripped length from (1) [mm]	9mm
Stripped length up to (1) [mm]	10mm
Stripped length (1) [in]	0.372n
Type of wiring	Side-entry wiring