Zinc It - Galvanic Rust Prevention

CRC Zinc It is a single component Zinc rich compound with a special epoxy binder and contains over 90% pure zinc. CRC Zinc It is a cold galvanising application that fuses directly to clean iron, or steel surfaces through electrochemical action.

CRC ZINC IT is a single component Zinc rich compound witha special epoxy binder and contains 93% of the highest purity Zinc in the dried film, to give Galvanic Rust
Prevention.

Applications: CRC ZINC IT is idea for use on;

• Transmission Towers
• Transformers
• Radio and TV Relay Towers
• Power Generation Equipment
• Structural Steel
• Trailers
• Roofs
• Guard Rails
• Welding Seams
• Rivet Holes
• Fencing
• Storage Tanks
• Off Shore Oil Rigs
• Ships
• Railroad Equipment
• Sub-station Equipment
• Touch-Up over galvanized coatings
• Coastal and Shipborne Installations subject to severesalt water and salt spray corrosion.

FEATURES:

• Easy to apply – aerosol only
• Long term protection to steel because of cathodic action
• Metallic zinc coating is universally accepted as the best method of rust prevention.
• Flexible continuous protective film

SPECIFICATIONS:

• Flash Point: 41°C
• Specific Gravity (20°C): 2.20 +/- 0.05
• Temperature Resistance: Up to 400°C
• Complete Cure (20°C): 72 hours
• Average Film Thickness: 50 Microns
• Solubility in Water: Insoluble
• VOC Content including propellant: 53%wt, 580 g/litre
• Propellant: Hydrocarbon

Performance Characteristics:

• Type of Film: Dry, Flexible
• Film Thickness:
  • Wet – 150 microns
  • Dry – 75 microns
• Coverage: 6m.sq/Lt at 75 microns
• Drying Time: 20 min. to touch, 8hrs to recoat, 24 hrsto hard
• Preparation: Thorough abrading, firm dry surface
• Spraying: Clean up with thinners