{tab Overview}

PRO3000 ANALOG TONE & PROBE KIT - FLUKE NETWORKS

The Pro3000 Analog Tone and Probe is your best choice for toning and tracing wire on non-active networks, and specifically for identifying individual pairs with SmartTone® technology.

Angled bed-of-nails clips allow easy access to individual wires, and the RJ-11 connector is ideal for use on telephone jacks.The large loud speaker on the network probeallows you to hear through drywall, wood or other enclosuresto find wires quickly and easily.

You can send this loud tone up to 10 miles (16 kilometers) on most cables! Attach the nylon pouch to your belt, and you will beequipped for any wire identification job.

Tone and trace wire on non-active networks
SmartToneTM technology provides five distinct tones for exact pair identification
Sends loud tone up to 10 miles (16 kilometers) on mostcables
Loud speaker on Probe makes the tone easier to hear through drywall, wood, and other enclosures
Angled bed-of-nails clips allow easy access to individual pairs
RJ-11 connector is ideal for use on telephone jacks
Attach nylon pouch (included in kit) to your belt for easy transport

{tab Specs}

Specifications

Pro3000 Analog Toner Specifications
User interface	Slide switch selects Continuity orTone ModePush button switch selects SOLID, ALT or OFFTone mode LEDContinuity/Polarity LED
Solid Frequency	1000 Hz nominal
Alternating Frequency	1000/1500 Hz nominal
Over Voltage Protection	60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode	8 dbm into 600 ohms
Output Voltage Level in Continuity Mode	8 Vdc with fresh battery
Battery	9V alkaline
Temperature	Operating: -20° C to 60° C, Storage: -40° C to 70° C
Case dimensions	2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)

Pro3000 Analog Probe Specifications
User interface	ON/OFF pushbuttonVolume dialReplaceable tip3.5 mm earphone jack
Battery	9V alkaline
Temperature	Operating: -20? C to 60? C, Storage: -40? C to 70? C
Case dimensions	9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)

Pro3000 Analog Toner Specifications
User interface	Slide switch selects Continuity orTone Mode Push button switch selects SOLID, ALT or OFF Tone mode LED Continuity/Polarity LED
Solid Frequency	1000 Hz nominal
Alternating Frequency	1000/1500 Hz nominal
Over Voltage Protection	60 Vdc in Toner/Polarity Mode
Output Power in Tone Mode	8 dbm into 600 ohms
Output Voltage Level in Continuity Mode	8 Vdc with fresh battery
Battery	9V alkaline
Temperature	Operating: -20? C to 60? C, Storage: -40? C to 70? C
Case dimensions	2.7 in. x 2.4 in. x 1.4 in. (6.9 cm x 6.1 cm x 3.6 cm)

Pro3000 Analog Probe Specifications
User interface	ON/OFF pushbuttonVolume dialReplaceable tip3.5 mm earphone jack
Battery	9V alkaline
Temperature	Operating: -20? C to 60? C, Storage: -40? C to 70? C
Case dimensions	9.8 in. x 1.6 in. x 1.3 in. (24.9 cm x 4.1 cm x 3.3 cm)