T-LP60X fully automatic belt-drive turntable is an affordable, easy-to-use turntable that plays both 33? and 45 RPM records and, with its built-in switchable phono preamp, can be connected directly to your home stereo, powered speakers, computer and other components, whether they have a dedicated phono input or not. The ATLP60X features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adaptor that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited.

The turntable comes with a detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM record adaptor, and a removable hinged dust cover.

• Experience the high-fidelity audio of vinyl
• Fully automatic belt-drive turntable operation with two speeds: 33?, 45 RPM
• Anti-resonance, die-cast aluminium platter
• Redesigned tonearm base and headshell for improved tracking and reduced resonance
• Integral Dual Magnet phono cartridge with replaceable diamond stylus (ATN3600L)
• AC adaptor handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
• Built-in switchable phono pre-amplifier for phono- or line-level output
• Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM record adaptor, and removable hinged dust cover
• Type Belt drive turntable, fully automatic 
• Motor DC servo-controlled 
• Speeds 33-1/3 RPM, 45 RPM 
• Turntable Platter Aluminium 
• Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS) 
• Signal-to-Noise Ratio >50 dB (DIN-B) 
• Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec, Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec 
• Phono Pre-Amp Gain 36 dB nominal, RIAA equalized 
• Power Supply Requirements 240V AC, 60 Hz, 3W 
• Dimensions 359.5mm W x 97.5mm H x 373.3mm D 
• Accessories Included 3.5mm mini-plug (male) to dual RCA (male) output cable; 45 RPM adapter; removable hinged dust cover .