Enecharger QC3-AC1-20W-A Quick Charge 3.0 USB Fast Charger with USB-A 20W Output

Brand New

Selling Unit	EACH
Description	Enecharger Quick Charge 3.0 USB Fast Charger with USB-A 20W Output
Width	52mm
Height	48mm
Length/Breadth/Depth	31mm
Weight	73g

AC wall charger with 1 x USB-A 20W output.

Features:

Qualcomm® Quick Charge™ 3.0 technology to fast charge compatible devices up to 80% in about 35 minutes. 4x faster charging speeds than conventional (non-QC) chargers[1].
Up to 20W max. output.
Multiple output voltage charging - 5V / 9V / 12V / 20V.
Intelligent auto-detect chooses the best voltage for the connected device.
Worldwide use: 100-240V input.
Built-in safety: over current protection, over voltage protection, short circuit protection, over temperature protection.

Specifications:

Input: 100-240VAC 0.5A 50/60Hz
Output: USB-A with QC3.0 - 5V 3A / 9V 2A / 12V 1.5A / 20V 1A
Total Power: 20W

[1] Based on internal tests charging a 2750mAh fast-charge battery (1.5C charge rate) and using the maximum power for a thermal limit of 40C for all charging implementations. Charge time based on 0% to 50% (August 2015). Source: QTI research Qualcomm Quick Charge and Qualcomm Snapdragon are products of Qualcomm Technologies, Inc

Qualcomm® Quick Charge™ 3.0 Technology inside

Ultra Fast Charging for Mobile Devices

Quick Charge 3.0

The latest power supplies and products from Enecharger feature integrated Quick Charge 3.0 technology inside made to suit the modern fast paced lifestyle.

With Quick Charge 3.0 technology, you can now charge a typical 3300mAh smartphone battery from 0% to 80% capacity in as little as 35 minutes. It’s 100% backwards compatible with Quick Charge 1.0 and Quick Charge 2.0 devices, and it supports a broad range of connectors: USB Type-A, USB micro, USB Type-C, or proprietary connectors. Quick Charge is supported by a far-reaching assortment of certified accessories, including wall chargers, car chargers, battery packs, and power controllers.

Quick Charge 3.0 employs Intelligent Negotiation for Optimum Voltage (INOV), an algorithm which allows your portable device to determine what power level to request at any point in time, enabling optimum power transfer while maximizing efficiency. It also supports wider voltage options, allowing a mobile device to dynamically adjust to the ideal voltage level supported by that specific device.

Ideal for use with QC3.0 enabled devices from major brands including HTC, LG, ZTE and others. Enecharger's QC3.0 adaptors and power supplies are also compatible* with non-Quick Charge enabled devices as well, including iPhones and iPads.

*All USB charged devices can be charged safely with this charger however charge rates will differ and may be slower depending on the charge acceptance of the device.

(QC3-AC1-20W-A)