5V 64-step 4-phase Stepper motor with ULN2003 interface board specifically for interfacing with Arduino based projects.
A, B, C, D four-phase LED indicates the status of the stepper motor work
Dimensions of Board : 31 × 35mm
ULN2003 Darlington using high-power stepper motor driver chip

Features

• The rotation angle of the motor is proportional to the input pulse.
• The motor has full torque at standstill(if the windings are energized)
• Precise positioning and repeatability of movement since good stepper motors have an accuracy of – 5% of a step and this error is non cumulative from one step to the next.
• Excellent response to starting/stopping/reversing.
• Very reliable since there are no contact brushes in the motor. Therefore the life of the motor is simply dependant on the life of the bearing.
• The motors response to digital input pulses provides open-loop control, making the motor simpler and less costly to control.
• It is possible to achieve very low speed synchronous rotation with a load that is directly coupled to the shaft.
• A wide range of rotational speeds can be realized as the speed is proportional to the frequency of the input pulses.
• Rated voltage: 5VDC
• Number of Phase : 4
• Speed Variation Ratio : 1/64
• Stride Angle : 5.625° /64
• Frequency : 100Hz
• DC resistance: 50?±7%(25?)
• Idle In-traction Frequency: > 600Hz
• Idle Out-traction Frequency: > 1000Hz
• In-traction Torque: >34.3mN.m(120Hz)
• Self-positioning Torque: >34.3mN.m
• Friction torque: 600-1200 gf.cm
• Pull in torque: 300 gf.cm
• Insulated resistance: >10M?(500V)
• Insulated electricity power : 600VAC/1mA/1s
• Insulation grade: A
• Rise in Temperature: <40K(120Hz)
• Noise: <35dB(120Hz,No load,10cm)