Intelligent 18W LED Batten Light (600mm) 

The ENSA LEDBT18WS is an automated, customisable, energy saving batten light. It features a 5.8GHz microwave motion sensor, daylight sensor and control electronics to compound energy savings offered by switching to LED from fluorescent tubes.  

Features

• Effectively halve power use compared to 600mm (2ft) fluorescent twin battens. 
• Compound your energy savings with adjustable daylight and motion sensors.
• 360° microwave sensor detects motion through doors, glass or even thin walls. 
• IP65 rated: polyurethane gaskets, stainless steel clips and polycarbonate diffuser. 
• Adjustable 10s ~ 12min on-time delay: perfect for carparks, stairwells and more

Specifications

Optical 

• Light Output: 1350lm
• Luminous Efficacy: 75lm/W
• Colour Temperature: 6000K
• Colour Rendering Index: > 70
• Beam Angle: 140°
• Light Decay:<15% at 20,000 hours
• Rated Lifespan: > 50,000 hours

Electrical

• Power Consumption: 18W
• Input Voltage: 220-240VAC (50Hz)
• Power Factor: > 0.9
• Dimmable: No
• Motion Activated: Yes

General

• Ingress Protection: IP65
• Plug / Socket / Base: Internal terminal block
• Reflector / Diffuser: Clear polycarbonate diffuser / Metal clips
• Housing Adjustments: N/A
• NSW ESS Accepted: No
• Operating Environment: -20° ~ 50°C
• Dimensions:600 x 86 x 65mm

Other

• mbient Light Sensor: 3 ~ 2000lx (adjustable)
• Battery Backup: N/A
• Certifications: N/A
• Dimmed Brightness: N/A
• Dimming Description: N/A
• Dimming Timeout: N/A
• Emergency Power Output: N/A
• Equivalent Wattage: 40W fluorescent
• Installation Materials: N/A
• Motion Detection: 360° Microwave (5.8GHz) / 8m radius (adjustable)
• On-Time Delay: 10s ~ 12min (adjustable)
• Standby Light Modes: Off (0% brightness) / Dimmed (50% brightness)