{tab Overview}

9521A LIGHT DUTY ANTENNA ROTATOR - CHANNEL MASTER

Channel Master's rotators are built strong and feature weatherproof, one-piece cast-aluminum housings. Theyhave precision metal gears and steel thrust bearings for lasting durability. Channel Master rotator combos include the rotator, controller, IR remote, mount clamps and hardware.

Channel Master CM-9521A Light Duty Antenna Rotators are perfect for rotating UHF, VHF, 6-Meter, TV, FM or magnetic loop antennas.

These rotators have a programmable rotor-controller with companion IR remote-control. Channel Master controllers remember your favorite antenna directions… even after a power outage! That means you may program in your favorite directions and rapidly return to your hottest DX path, repeaters, FM DX station or any other pre-programmed location of interest. Directional control maybe programmed by TV channel number or digital compass direction.

Control all functions with the remote control. The control console displays your chosen location or relative bearing.

{tab Features}

Automatic digital controller
Direct 3-digit compass control- in 1 degree increments(e.g. 093 degrees or 288 degrees)
68 position programmable memory (for TV channels 1-69)
Handy Infra-Red remote control (included)
Use up to 280 ft. AWG 20 (3-conductor) control cable (not included)
Use rotator support masts from 1.25 to 2.0 in. diameter (not included)
IR remote uses 2 AAA Alkaline cells (included)

{tab Specifications}

Rotation speed: 1 RPM
Gear Ratio: 3,200 to 1
Accepts TV antenna mast up to 2.0 in. diameter
Power: 18VAC 1000mA power supply (included), control unit provides power for the rotator
Operating Temperature: -20 to 55 Degrees Celsius (-4 to 132 F)
Rotate Torque: up to 100 lbs.
Driving Torque: up to 1,000 lbs.

{tab FAQ}

Q. The rotator will only turn 300 degrees and notthe full 360 degrees. How do I change this?
The rotator cannot be changed. We looked to modify the programming to suit Australia, however this was not possible. For the majority of our customers, a 300 degree range of motion is sufficient. We have not heard of an upcoming replacement to the 9521a, though the request has been made to the Channel Master engineers in the US.