The PM45-4G is a versatile alarm communicator that reports on 4G, GPRS and IP to the Central Station. This unit can interface with a range of alarm panels using Contact ID. Primary alarm path is IP, followed by 4G/GPRS in the event of a wired ethernet failure. If no IP connection exists the communicators will report on GPRS or 4G only.

Additional Features

• Small size - Fits inside alarm panel enclosure and suitable for ATM & M2M applications
• Secure VPN within Optus & Telstra networks - Dedicated for Permaconn events only
• AES128 encryption for alarm data - Secure transmissions over the public internet
• High speed RS232 Interface - Future development
• Various diagnostic LEDs - Easy installation
• Activate, commission and diagnose using Atlas - Seamless installation process
• Three (3) dedicated paths of communication - Uptime in excess of 99.9%
• Internal watchdog reset function - No unnecessary service call-outs
• Monitors & reports dialler interface lead status - Panel dialler to Permaconn interface secure
• AS/NZ2201.5:2008 compliance

Specifications

• Antenna - Triple band 3G & Triple band 4G
• Approvals - EN 55022:2006/A1:2007, AS/CA S042.1-2011, AS/CA S042.4-2011 AS/NZS 60950.1-2011, AES2201.5:2008, EN                                 62311:2008, EN 301489-1 EN 301 489-24, EN 301 908-1, EN60950-1
• Auxiliary Input - 3 x 24Hr input - state change detected every second. / EOL 3.3K
• Auxiliary Output - 3 x Open Collector output @ 50mA (max) / Function control using Atlas web portal and/or 'Pocket Secure’
• Communication Protocol - Ethernet (10/100BASE-T)
• Data Security - AES Encryption
• Dimensions - 110mm (h) x 25mm (d) x 80mm (w)
• Housing Material - ABS plastic - Green
• Modem - Quectel EC21
• Network Protocol - DHCP or Static IP
• Operating Environment - 0°- 50°C @15% to 85% humidity (non-condensing)
• Power - 8–15V DC. Terminal (must power from appoved supply)
• Power Consumption - Standby: 0.08A @13.8V DC / Transmitting: 0.19A @13.8V DC
• Serial Port - High Speed RS232 interface
• Static IP Network Configuration - Ethernet interface using ‘IpSetup’ program / Atlas web portal using mobile connection
• Supported Modulation - BELL-103, ITU-V21/V22/V22B
• Weight - 120g