Brand New

 High capacity 12.8V 90Ah Lithium Iron Phosphate (LiFePO4) smart battery module with built-in Bluetooth

With bluetooth capabilities, users can monitor their Victron LiFePO4 battery through the Victron Connect app (available for iOS and Android).

For Optimum efficiency, always update to the latest firmware using the Victron Connect app prior to installation.

Specifications:

Cycle life: 2500 cycles (80% DoD), 3000 cycles (70% DoD), 5000 cycles (50% DoD)
Max. continuous discharge current: 180A
Recommended continuous discharge current: ≤90A
End of discharge voltage: 11V
Charge voltage: 14.0V - 14.4V (14.2V recommended)
Float voltage: 13.5V
Max. charge current: 270A
Recommended charge current: ≤45A
Operating temperature: -20°C to +50ºC
Storage temperature: -45°C to +70ºC
Humidity (non-condensing): max. 95%
Protection class: IP22
 

Consider implementing Victron Energy's range of Lithium Iron Phosphate modules in high energy demand applications:

More RUGGED compared to lead acid batteries. 
LiFePO4 batteries do not need to be fully charged all the time. A partial charge may even slightly improve service life. In addition, LiFePO4 batteries have a wider operating temperature range, excellent cycling performance, lower internal resistance and higher rate of efficiency than lead acid batteries.

Lead acid batteries will fail prematurely due to sulfation if the battery is rarely, or never at all, fully charged or if the battery is stored for long periods partially or fully discharged. 

Higher ENERGY EFFICIENCY than lead acid batteries.

Round trip energy efficiency (discharge from 100% to 0% and back to 100% charged) of LiFePO4 batteries is 92% compared to lead acid batteries at around 80%. In off-grid applications like solar and/or wind, better energy efficiency means less energy loss.

SMALLER and LIGHTER than lead acid batteries.

LiFePO4 batteries are up to 70% smaller and 70% lighter than equivalent lead acid batteries.