Send high definition AV signals to a screen in another room up to 150m away using a Cat5e/6 cable through a common router or Ethernet switch. A sender and receiver with power supplies are included, and additional receivers are available separately (AC1753) to share the same AV signal to additional screens. Setup is straightforward using the TCP/IP protocol which is used for computer networking and no software is required. Simply connect the receiver and sender into your gigabit network using Cat5e or Cat6 leads (not included) or directly with one long Cat5e or Cat6 cable (not included). Features an HDMI loop output, is compatible up to HDMI 1.3 with up to 6.75Gbps bandwidth, and compliant to HDCP 1.4b. It even allows you to use your infrared remote control from the receiving point, so you can control the device you’re sending video from! What’s more is the infrared extension too, so you can take your remote control with you and still control the remote device. Includes infrared emitter, infrared receiver and two mains power adaptors.

Features:

. 100m (Cat5e), 150m (Cat6) Transmission Distance

. Web Based Interface Control

. HDMI Pass-Through

. Multicast Receiver Support

. Infrared Remote Control Extender

Specifications