With this NESS 3G/4G Dialler Unlocked you no longer need to worry about the absence of PSTN phone lines with the NBN roll out.

The Ness 4G Dialler provides a 3G or 4G pathway for alarm diallers to communicate in the absence of a land line. Ideal for “Naked phone line” households, remote locations and anywhere you need easy and reliable cellular dialler monitoring.

This unit provides support for any dialler that reports to any Central Monitoring Station (without a need to any special control room receiver) or can dial an alarm event to a personal number, in the same fashion as it would if a land line was available. Also includes a back up battery to allow operation in the event of mains power failure. No programming of GSM Dialler required, just add a SIM card and you’re ready to go.

• GSM Compatibility: 3G/4G
• AU Frequencies Supported MHz: 4G; Telstra B1 2100, B3 1800, B7 2600, B8 900, B28 700, Optus B1 2100, B3 1800, B7 2600, B28 700, B40 2300, Vodafone B1 2100, B3 1800, B5 850. 3G; Telstra B5 850, Optus B8 900, B1 2100, Vodafone B1 2100
• Alarm Panel compatibility: Compatible with most alarm diallers in Contact ID DTMF and Voice formats, Including all Ness systems (e.g. D8X/D16X Series, D8xD / D16XD Series,
• SmartLiving Series and M1 Series)
• Operation Voltage: 12VDC (Plug Pack Supplied)
• Battery Backup: Internal rechargeable Battery (Included)
• Battery Backup Time max.: 2-3 Hours on its own internal battery.
• Power Consumption: 25mA (Standby), 300mA (Communicating)
• Antenna: 3dB whip with magnetic base and 2.9m Cable length
• Dimensions: 175 x 115 x 35 mm
• Weight: 370g
• Operation Temperature: 0°C to +50°C